The NEMA 17 stepper motor (Model: 17HS4023) is a powerful motor capable of microstepping, high-speed rotation, and high-torque holding. The stepper motor kit also includes a DRV8825 stepper driver and motor bridge, which makes getting started with motor driving easy. With the stepper bridge, only a Raspberry Pi or Arduino, 12V supply, and five jumper wires are needed to control the NEMA 17 stepper motor. This stepper kit can be used in applications involving 3D printers, DIY CNC machines, precise camera movement, LiDAR rotation, among others!

Included in the NEMA 17 Stepper Motor Kit:

• 1x NEMA-17HS4023 Stepper Motor

• 1x DRV8825 Stepper Driver with Heat Sink

• 1x DRV8825 Driver Bridge

• 5x Female-to-Female Jumper Wires

• 1x Stepper-to-Bridge Connector Wire

Features of the NEMA-17HS4023 Motor:

• 42mm x 42mm x 23mm (LxWxH - Approximate Dimensions)

• Micro-stepping down from 1.8° down to 0.05625°

• Wide Voltage Supply Range: 5V - 24V

• 0.7A - 1.0A per phase (2-phases total)

• 130g Weight

• 13 N·cm Holding Torque

• Clockwise and Counterclockwise Rotation

• Rotation speeds at 1.8° Increments up to ~500RPM (12V, no load), ~1800RPM (24V, no load)

• Controllable via Arduino or Raspberry Pi

• Tutorial on the NEMA 17 Kit here